Computational Technology Resources - CCP

F. Caputo, G. Lamanna, A. Soprano and A. De Luca

Department of Industrial and Information Engineering, Second University of Naples, Italy

doi:10.4203/ccp.105.43

F. Caputo, G. Lamanna, A. Soprano, A. De Luca, "The Effects of Dimensional Tolerances and Processing Parameters on Riveting Joints", in , (Editors), "Proceedings of the Ninth International Conference on Engineering Computational Technology", Civil-Comp Press, Stirlingshire, UK, Paper 43, 2014. doi:10.4203/ccp.105.43

Keywords: bearing, riveting joint, residual stresses, riveting process.

Summary

In this paper, after recalling the activities which are currently being carried out at the Second University of Naples, which aim to investigate the response of riveted joints and the influence on their behaviour of the residual stress state induced in the course of the manufacturing process. The paper reporst on the particular problem of the bearing resistance of such a riveted joint, which has been investigated both experimentally and numerically also taking into account the said residual stresses and the results obtained are compared. This makes it possible to conveniently calibrate the adopted numerical procedures.

purchase the full-text of this paper (price £20)

go to the previous paper
go to the next paper
return to the table of contents
return to the book description
purchase this book (price £45 +P&P)

	Computational & Technology Resources an online resource for computational, engineering & technology publications
	not logged in - login
Front Page Browse CCP CSETS CTR IJRT Other Authors Search Purchase Guide FAQ Contact us	Civil-Comp Proceedings ISSN 1759-3433 CCP: 105 PROCEEDINGS OF THE NINTH INTERNATIONAL CONFERENCE ON ENGINEERING COMPUTATIONAL TECHNOLOGY Edited by: Paper 43 The Effects of Dimensional Tolerances and Processing Parameters on Riveting Joints F. Caputo, G. Lamanna, A. Soprano and A. De Luca Department of Industrial and Information Engineering, Second University of Naples, Italy doi:10.4203/ccp.105.43 purchase the full-text of this paper Full Bibliographic Reference for this paper F. Caputo, G. Lamanna, A. Soprano, A. De Luca, "The Effects of Dimensional Tolerances and Processing Parameters on Riveting Joints", in , (Editors), "Proceedings of the Ninth International Conference on Engineering Computational Technology", Civil-Comp Press, Stirlingshire, UK, Paper 43, 2014. doi:10.4203/ccp.105.43 Keywords: bearing, riveting joint, residual stresses, riveting process. Summary In this paper, after recalling the activities which are currently being carried out at the Second University of Naples, which aim to investigate the response of riveted joints and the influence on their behaviour of the residual stress state induced in the course of the manufacturing process. The paper reporst on the particular problem of the bearing resistance of such a riveted joint, which has been investigated both experimentally and numerically also taking into account the said residual stresses and the results obtained are compared. This makes it possible to conveniently calibrate the adopted numerical procedures. purchase the full-text of this paper (price £20) go to the previous paper go to the next paper return to the table of contents return to the book description purchase this book (price £45 +P&P)
Back to top	©Civil-Comp Limited 2023 - terms & conditions