Computational Technology Resources - CCP

B. Kovacic*, G. Lipnik+ and A. Strukelj*

*Faculty of Civil Engineering
+Faculty of Electrotechnical Science, University of Maribor, Slovenia

doi:10.4203/ccp.63.7.4

B. Kovacic, G. Lipnik, A. Strukelj, "Using the Laser Geodetical Equipment Controlled by Computer", in B. Kumar, B.H.V. Topping, (Editors), "Computing Developments in Civil and Structural Engineering", Civil-Comp Press, Edinburgh, UK, pp 243-246, 1999. doi:10.4203/ccp.63.7.4

Abstract

Statically tests are obligatory for all bridging constructions of which the distance is greater than regulated in local standards (In Slovenia regulated distance is 15 meters). Till now these test have been done by the inductive displacement transducers and by the classical geodetic instrument NIKON - DTM 720. which have installed specially software AP-700 for determined the vertical movements. Now, the statically measurements can be performed by the laser level NIKON AL-50 and sensors NIKON - Electronics Positioning Staff (EPS) 02A.

Measurement results showed that instruments have high accuracy and that measurements can be done faster. Laser sensors are connected to personal computer with communication cable. Sensors are controlled on personal computer with program named "Laser".

purchase the full-text of this paper (price £20)

go to the previous paper
go to the next paper
return to the table of contents
return to the book description
purchase this book (price £66 +P&P)

	Computational & Technology Resources an online resource for computational, engineering & technology publications
	not logged in - login
Front Page Browse CCP CSETS CTR IJRT Other Authors Search Purchase Guide FAQ Contact us	Civil-Comp Proceedings ISSN 1759-3433 CCP: 63 COMPUTING DEVELOPMENTS IN CIVIL AND STRUCTURAL ENGINEERING Edited by: B. Kumar and B.H.V. Topping Paper VII.4 Using the Laser Geodetical Equipment Controlled by Computer B. Kovacic, G. Lipnik+ and A. Strukelj *Faculty of Civil Engineering +Faculty of Electrotechnical Science, University of Maribor, Slovenia doi:10.4203/ccp.63.7.4 purchase the full-text of this paper Full Bibliographic Reference for this paper B. Kovacic, G. Lipnik, A. Strukelj, "Using the Laser Geodetical Equipment Controlled by Computer", in B. Kumar, B.H.V. Topping, (Editors), "Computing Developments in Civil and Structural Engineering", Civil-Comp Press, Edinburgh, UK, pp 243-246, 1999. doi:10.4203/ccp.63.7.4 Abstract Statically tests are obligatory for all bridging constructions of which the distance is greater than regulated in local standards (In Slovenia regulated distance is 15 meters). Till now these test have been done by the inductive displacement transducers and by the classical geodetic instrument NIKON - DTM 720. which have installed specially software AP-700 for determined the vertical movements. Now, the statically measurements can be performed by the laser level NIKON AL-50 and sensors NIKON - Electronics Positioning Staff (EPS) 02A. Measurement results showed that instruments have high accuracy and that measurements can be done faster. Laser sensors are connected to personal computer with communication cable. Sensors are controlled on personal computer with program named "Laser". purchase the full-text of this paper (price £20) go to the previous paper go to the next paper return to the table of contents return to the book description purchase this book (price £66 +P&P)
Back to top	©Civil-Comp Limited 2023 - terms & conditions