Computational Technology Resources - CCP

Paper IV.2

A Library of Finite Elements for Solution with Fully Automated Mesh Generation

doi:10.4203/ccp.21.4.2

B. Tokarsky, "A Library of Finite Elements for Solution with Fully Automated Mesh Generation", in M. Papadrakakis, B.H.V. Topping, (Editors), "Advances in Post and Preprocessing for Finite Element Technology", Civil-Comp Press, Edinburgh, UK, pp 169-174, 1994. doi:10.4203/ccp.21.4.2

Abstract

Domain under consideration is divided into subdomains, and a local coordinate system is to be entered for each of them. Boundaries for each domain are approximated by "planes" in its coordinate system. An initial mesh is produced by intersecting with coordinate surfaces. Number o f nodal points is not more than 8 for each element. Distortions are absent. 3-D elements are not compatible. A special procedure is developed to combine them with 1-D and 2-D elements. For any problem under consideration only one initial mesh may be generated. With mesh iterative refining elements of the same kind are used.

purchase the full-text of this paper (price £20)

go to the previous paper
go to the next paper
return to the table of contents
return to the book description
purchase this book (price £60 +P&P)

	Computational & Technology Resources an online resource for computational, engineering & technology publications
	not logged in - login
Front Page Browse CCP CSETS CTR IJRT Other Authors Search Purchase Guide FAQ Contact us	Civil-Comp Proceedings ISSN 1759-3433 CCP: 21 ADVANCES IN POST AND PREPROCESSING FOR FINITE ELEMENT TECHNOLOGY Edited by: M. Papadrakakis and B.H.V. Topping Paper IV.2 A Library of Finite Elements for Solution with Fully Automated Mesh Generation B. Tokarsky Israel Aircraft Industries, Jerusalem, Israel doi:10.4203/ccp.21.4.2 purchase the full-text of this paper Full Bibliographic Reference for this paper B. Tokarsky, "A Library of Finite Elements for Solution with Fully Automated Mesh Generation", in M. Papadrakakis, B.H.V. Topping, (Editors), "Advances in Post and Preprocessing for Finite Element Technology", Civil-Comp Press, Edinburgh, UK, pp 169-174, 1994. doi:10.4203/ccp.21.4.2 Abstract Domain under consideration is divided into subdomains, and a local coordinate system is to be entered for each of them. Boundaries for each domain are approximated by "planes" in its coordinate system. An initial mesh is produced by intersecting with coordinate surfaces. Number o f nodal points is not more than 8 for each element. Distortions are absent. 3-D elements are not compatible. A special procedure is developed to combine them with 1-D and 2-D elements. For any problem under consideration only one initial mesh may be generated. With mesh iterative refining elements of the same kind are used. purchase the full-text of this paper (price £20) go to the previous paper go to the next paper return to the table of contents return to the book description purchase this book (price £60 +P&P)
Back to top	©Civil-Comp Limited 2023 - terms & conditions